Description:
The FCA6 is a 6 pair Fibre Channel probe designed to work with a logic analyzer to
capture and disassemble Fibre Channel Data. It demultiplexes the stream to a 32 bit
stream at a much lower rate (55 MHz).
The FCA6 was designed to operate with the Tektronix TLA 6xx and 7xx series of logic analyzers. A software package supplied with the unit enables disassembly of the captured stream directly on the Tektronix logic analyzer.
Key Features:
• 1.0625 and 2.125 Gbps operation
• Currently supported formats: S-FPDP and FC-AE (ASM point-to-point)
• Idle/zero data packet stripping in hardware via mode switch
• All-header stripping in hardware via mode switch
• Multiple fiber time alignment in hardware
• Tee and Repeat transmit modes supported
• Built-In test generator
• Optional generator package available
• Rear-panel signal passthru for additional user signals
• Customization available